Pirate Robot, Pirate, Modular Robot

Pirate Robot is a smart modular robot that is able to take a vertical climb, broadening the general application range and facilitating entry in the gas distribution network by means of vertically drilled holes. The robot is largely developed by using additive manufacturing. The robot uses a modular structure consisting of bending modules, drive modules and one rotation module. Two bending modules form a clamping v-shape which generates the necessary traction force on the tires. Two driven wheels are used for propulsion.

• Clamping

The robot uses a V-shaped section consisting of two modules to generate traction force on the tires. The tires are in this case neoprene rubber O-rings of 3 mm diameter. The amount of clamping force that can be generated using this V-shapeis dependent on the diameter of the pipe. The clamping module has a gear train to transfer power from the self-locking worm gear via the spring to the joint. For vertical climbing, the amount of clamping torque necessary depends on theavailable friction force. The friction force is depending on the materials: smooth PE or PVC for the pipe wall and rubber O-rings as tires. Every wheel has a motor mounted inside, called ’in wheel drive’. 

• Modular

Every wheel has an in-wheel mounted drive system, and every joint is able to bend in one plane, every module of the robot has the same make-up, except for the rotation module in the center. The minimal robot configuration consists of two clamping V-shapes with one center rotation point. This configuration can be made using four exactly the same modules and one different rotation module.

• Sensors

The robot consists of rotary hall-effect based sensors. These absolute position sensors have a resolution of 12 bit and are interfaced digitally (using  an  SPI  protocol).  

Specifications (Pirate Robot)

Product:

• Country: Netherlands 
• Company: University of Twente